This article will give you detailed information on the 10 best automotive engineering colleges in the world. You will also gain a better understanding of what automotive engineering is about.
As the demand for automotive engineers grows, a growing number of people want to work as automotive engineers.
However, the majority of them are unsure about which automotive school to attend. If you are in the category, this article is just for you.
We’ll go over the fundamentals of automotive engineering degree programs as well as the best automotive engineering colleges in the world. Automotive engineering is a relatively new field, having only been around for 100 years.
Because of the way the automobile’s engine and highway were combined, various global cultures have become popular.
The automotive industry now looks very different than it did 20 or 30 years ago, thanks to rapid technological advancements.
Read also: Top 13 Tuition Free Universities in the World
What Is Automotive Engineering?
Mechanical engineering includes automotive engineering. It is a subset of vehicle engineering, along with aerospace engineering and naval architecture.
This has to do with how motorcycles, automobiles, and trucks, as well as their engineering subsystems, are designed, manufactured, and operated.
Essentially, automotive engineering encompasses the design, development, and manufacture of automobiles using mechanical, electrical, electronic, software, and safety engineering principles.
Who Is An Automotive Engineer?
An automotive engineer is a person who designs the systems and mechanisms of automobiles.
They are professionals who ensure that the automotive design and system meet the quality and cost specifications set forth in the budget.
What Characteristics Do Automotive Engineers Possess?
Read also: Top 13 Tuition Free Universities in the World
What Does An Automotive Engineer Do?
Aside from developing passenger motorcycles, buses, cars, trucks, and other vehicles, an automotive engineer also has other responsibilities viz;
The automotive engineer’s other responsibilities can include any of the following:
•Vehicle and component research, design, development, and production.
•Cost estimates and design specifications are prepared.
•Make blueprints and drawings.
•Analysis of the proposed project’s energy, environmental, and safety aspects.
•Use computer models to predict vehicle or component behavior under various conditions.
•The creation of test procedures.
•Product failures should be investigated.
•Technical data analysis, interpretation, and condensation in reports or presentations.
•Oversee the technical team.
•Collaborate closely with civil, electrical, aerospace, chemical, and industrial engineers.
•Collaborate with professionals in other fields, such as marketing and law.
How Can I Become An Automotive Engineer?
Following are steps to follow for an individual to become an automotive engineer;
•Enroll in a Bachelor’s Degree Program
•Participate in an Internship
•Look for Employment Opportunities
•Participate in Continuing Education Opportunities
•Consider a Master’s Degree
Enroll in a bachelor’s Degree Program
Currently, there aren’t many universities that offer a bachelor’s degree in automotive engineering.
As an aspiring automotive engineer, you must first obtain a bachelor’s degree in mechanical engineering from a school that specializes in automotive engineering.
Read also:Cheapest Universities in Kuwait for International Students
Participate in an Internship
Typically, an internship in automotive engineering provides students with hands-on experience in the field.
It also allows them to apply what they’ve learned in the classroom to real-world situations.
Internships are typically offered by automotive suppliers or manufacturers, and they often include opportunities for students to specialize in a particular field.
Robotics, simulation software, and infrastructure are just a few of the specializations available.
Look For Employment Opportunities
An automotive engineer is a professional who can work on all aspects of an automobile’s design and performance.
For example, most automotive engineers are known for designing prototype cars.
Furthermore, some automotive engineers may be in charge of improving fuel system performance or discovering new low-cost materials to use.
Routine tasks may include reviewing projects and testing features using computer-driven design programs.
The Society of Automotive Engineers (SAE) provides a variety of continuing education programs for automotive engineers.
Participate in Continuing Education Opportunities
Professionals in the field can take advantage of continuing education opportunities. They are available online as well as in a classroom setting.
Most continuing education opportunities in the field of automotive engineering cover a wide range of topics, including:
• bodies and structures
•fuels and energy sources
•vehicles and performance and safety.
Read also:Best Engineering Schools – Top Engineering Colleges in US
Become a licensed
If you’re serious about moving up in your career as an automotive engineer, you should consider getting a professional license.
In essence, obtaining a license distinguishes oneself from unlicensed engineers. It enables you to bid on government contracts, provide consulting services, and provide public services.
Despite the fact that most states set their own requirements, the path to licensure is unique. It usually entails the following:
•Graduating from an ABET-accredited program
•Passing two National Council of Examiners for Engineering and Surveying exams
•As well as accumulating the necessary work experience
Consider a Master’s Degree
Many universities offer master’s degrees in automotive engineering, as opposed to bachelor’s degrees.
Students who earn a master’s degree in automotive engineering gain advanced knowledge and skills in the field.
However, a master’s degree is not required to work in the field; a bachelor’s degree is sufficient to begin a career.
Regardless, students in a master’s degree program learn about innovative designs and systems.
Furthermore, the program provides them with research opportunities and can lead to advancement in their careers.
What Are Educational Requirements For Automotive Engineering?
A bachelor’s degree is currently the entry requirement for a career in automotive engineering. A master’s degree, on the o hand, can help you advance or gain an advantage over others.
Read also: 21 Free Summer Programs for High School Students
Automotive Engineering Bachelor’s Degree
As previously stated, most schools do not offer an automotive engineering bachelor’s degree program.
A large number of automotive students apply to mechanical engineering programs with a focus on automobiles.
•Automobile dynamics •Automotive electronics •Fuel cell systems •Powertrain dynamics •Engine parts •Diesel engine theory •Alternative energy sources are some of the topics covered in a bachelor’s degree program in automotive engineering.
In general, a bachelor’s degree program in automotive engineering takes four years to complete.
In addition, most programs cover senior design projects and internships in the automotive industry during the final semester.
As a result of these programs, it is easier to find a full-time job soon after graduation.
Master of Science in Automotive Engineering
Students pursuing a master’s degree in automotive engineering have the option of concentrating on a specific aspect of the industry.
Manufacturing processes, electrical and computer systems, mechanical systems, and materials science are all popular specialization tracks.
•Design and manufacturing
•Energy and environment
•Noise and vibration
•Electronics and computer software
•Dynamics and control are some of the topics covered in an automotive engineering master’s degree.
In general, a master’s degree in automotive engineering takes about two years to complete.
Why does one need to attend an Automotive Engineering School?
Engineers must usually attend a college or university that is accredited by the Accreditation Board for Engineering and Technology (ABET).
The reason for this is that when evaluating an applicant for an automotive engineer position, some employers place a greater emphasis on the reputation of the engineering school that the student attended.
Read also:10 Cheapest Universities in Spain for International Students
How Much Does It Cost to Get a Degree in Automotive Engineering?
Answer to CollegeCalc, the average annual out-of-state cost for a bachelor program in Automotive Engineering Technology/Technician is $31,798.
In other words, the total cost of completing the program over the course of four years is estimated to be $127,192.
What are the Best Automotive Engineering Schools in the world?
Why do we consider so many factors when deciding on the best automotive engineering school to attend? They are listed below.
•Number of programs
This indicates whether or not the program has been approved by the appropriate accrediting body. It also informs students whether or not they are eligible to pursue the program at the school.
The student can find out how many degree programs the school offers here.
The school’s acceptance rate informs students about how competitive the school is in terms of admission.
The higher the acceptance rate, the more likely a student is to be accepted. However, the lower the acceptance rate, the less likely you are to be accepted.
A good example is MIT, which has a low acceptance rate due to its global ranking.
What Do Automotive Engineers Earn?
According to Glassdoor, the national average salary for an automotive engineer is $76,430. The average salary for an Automotive Engineer, on the other hand, is $76,513, according to PayScale.
The following are some of the most well-known employers of automotive engineers, as well as their pay:
•Ford Motor Company ($91,500) •General Motors Corporation ($85,500) •FCA Corporation ($77,500) •Chrysler Group LLC ($88,500)
The following is a list of the top ten automotive engineering colleges in the world.
Here is a list of the top ten schools in the world where you can get a degree in automotive engineering, in no particular order:
1. Indiana state university
The university is accredited by the Accreditation Board of Engineering and Technology (ABET) and the Association of Technology, Management, and Applied Engineering and is located in Terre Haute, Indiana, United States (ATMAE). The rate of acceptance is 89%.
Indiana State University, which was founded in 1865, is one of the best automotive engineering colleges in the world.
The B.S. in automotive engineering technology program focuses on all aspects of the automotive and wheeled transportation industries.
It also combines the necessary experiences from theory, laboratory, and practical to assist students in pursuing a career in the automotive industry or related industries.
2. Austin Peay state university
Austin Peay state university is next on our list of the best automotive engineering colleges in the world. Austin Peay State University is a public university in Clarksville, Tennessee, with an 89% acceptance rate. The Accreditation Board of Engineering and Technology has granted the school accreditation (ABET).
In automotive engineering technology, Austin Peay State University offers both an associate in applied sciences (AAS) and a bachelor’s degree in science (B.Sc.).
Graduates of the automotive program are prepared for work in the automotive industry, including design and manufacturing of automotive components and systems.
Furthermore, the bachelor’s degree program in automotive engineering includes 123 credit hours and seven full-time faculty members.
Read also:Cheapest Universities in Luxembourg for International Students
3. University of Michigan
The University of Michigan is next on our list of the best automotive engineering colleges in the world. The University of Michigan is a public research university in Ann Arbor, Michigan, that is also accredited by ABET. It has a 29% acceptance rate.
The University of Michigan, founded in 1817, is one of the best schools for studying automotive engineering with an emphasis on current engineering fundamentals and practice.
In this technologically dynamic and compelling field, this degree prepares students to be innovators who can address global problems.
The Master of Engineering (MEng) in Automotive Engineering is 30 credit hours long and takes 1-2 years to complete full-time. On the other hand, it can be completed part-time in 2.5-5 years.
4. Ferris state university
Another outstanding university making the list of the best automotive engineering colleges in the world. Ferris State University is located in Big Rapids, Michigan. Also accreditated by ABET and has an acceptance rate of 68%.
Ferris University is one of the top accredited schools for automotive engineering, with a student-to-faculty ratio of 16:1.
Essentially, the Bachelor of Automotive Engineering program at Ferris State University prepares students to develop, manufacture and testing self-propelled ground vehicles and their systems using basic engineering principles and technical skills.
This procedure, however, is carried out with the assistance of the team’s other engineers and professionals.
5. Minnesota state university, Mankato
Minnesota state university is located in Mankato, Minnesota, and is accredited by ABET. It has a 62% acceptance rate. Minnesota state university is one of the best automotive engineering colleges in the world.
Minnesota State University, formerly Mankato State University, is one of the world’s best accredited automotive engineering schools.
The school, which was founded in 1868, offers a bachelor’s and master’s degree in automotive engineering technology.
The BSC in automotive technology is a 128-credit program that teaches students how to design, develop, test, apply, modify, and maintain vehicles and their components for use in transportation systems.
The MS Automotive Engineering Technology program also prepares students for careers in product research, design, and development.
They are also prepared for manufacturing in both the original and aftermarket automobile industries.
Read also:7 Cheapest universities in Poland for international students
6. Brigham young university Idaho
Brigham Young University is located in Rexburg, Idaho is also accredited by ASE (Automotive Service Excellence). They have a 96% acceptance rate. The list of Minnesota state universities includes Brigham Young University Idaho and Mankato university.
Brigham Young University Idaho, which was founded in 1888, is one of the best automotive engineering colleges in the world.
The bachelor’s degree in Automotive Engineering Technology at this institution combines automotive and engineering courses to prepare students for careers as service engineers, test engineers, and engineering technicians.
7. University of south wales
Another university on our list of the best automotive engineering colleges in the world is the University of South Wales. Cardiff, Wales, United Kingdom is home to the university. Chartered Engineer accreditation from the Institution of Engineering and Technology (IET).
The University of South Wales, which was founded on April 11, 2013, is one of the best schools for studying automotive engineering.
It offers automotive engineering bachelor’s and master’s degree programs.
Automotive degree programs provide students with the knowledge and skills they need to succeed in today’s automotive industry, with an emphasis on autonomous vehicle technology.
8. Bharath University
Bharath University is one of the best automotive engineering colleges in the world. Tamilnadu is a state in India, This university is also approved by ABET.
It offers B.Engr. degrees in automotive engineering and a B.Engr. in Mechanical Engineering with a concentration in automotive engineering.
The automobile engineering program, which began in 2003, covers the entire process of vehicle development, from design to manufacturing, maintenance, and service.
9. Tsinghua University
Tsinghua University is a Chinese university that is also accredited by ABET. Tsinghua University, which was founded in 1911, is one of the best automotive engineering colleges in the world.
The school offers a mechanical engineering bachelor’s degree with an emphasis on automotive engineering.
To meet the high demand of the automobile industry and to address the social problems caused by automobiles, the department of automotive engineering employs a student-centered education method.
This department offers high-quality courses and fosters a positive academic environment for students interested in the automotive industry.
Read also:15 Best Community Colleges In Canada For International Students
10. University of Tennessee
Knoxville, Tennessee is home to the University of Tennessee. The American Board of Engineering and Technology (ABET) accredited the University of Tennessee. The University of Tennessee has a 77% acceptance rate. It is one of the best automotive engineering colleges in the world.
The University of Tennessee, founded in 1794, is one of the best schools for earning a bachelor’s degree in mechanical engineering with a concentration in automotive engineering.
Mechanical engineering is a program that focuses on the design, analysis, testing, and production of mechanical and thermal systems.
It also has a total of 128 credit hours and takes approximately four years to complete.
Best automotive engineering colleges in the world, our take;
More automotive engineers are needed as the automobile industry continues to grow and advance in technology.
To advance in their careers, however, these engineers must attend ABET-accredited universities and obtain a license.
I hope the schools and guidelines listed above will assist you in making career and decision-making decisions.
Trust you found our article on the 10 best automotive engineering colleges in the world helpful. Follow our website for related updates.